CENTER SEAL WITH SIDE GUESTING, SIDE SEAL AND THREE SIDE SEAL MACHINE - MODEL: MPM-CP240 S3





MACHINE FEATURES :

  • Single Station Unwind stand with Manual Powder Break.
  • Two Stage Bottom Sealing & One Station Cooling.
  • Continuous motion Center sealing and Side Sealing with Auto Open and Close
  • Digital temperature control’s with low temperature alarm for controlling temperature of Center sealing and Bottom sealing.
  • Colour Touch Screen Display with Native language.
  • Main motor AC motor with Variable Frequency Drive.
  • Unwind motor AC motor with Variable Frequency Drive.
  • Main motor, Unwind motor AC Drives & Servo Drives are synchronized.
  • High speed Auto Colour mark sensor.
  • Shock less Static Discharger.
  • Main draw roller driven by SERVO MOTOR CONTROLLED BY PLC
  • Built-in counter with buzzer.
  • Built-in totaliser
  • Error message with auto M/C off.
  • Low Temperature Protection
  • Print Mark Missing Protection
  • Over Speed Protection



ACCESSORIES

  • 1.Formation plates 3 nos.
  • 2 .8mm, 10mm, 16mm & 20mm Seal bars each 2 nos.
  • 3. Machine wiring diagram and tool kit.

OPTIONAL

‘V’ Notch, Hole Punch, 'D' Punch, Perforation Sealer, Auto Tension Control Break, Edge Guide system, Auto Stacker



SPECIFICATIONS

 
MAXIMUM WIDTH 240 mm
MINIMUM WIDTH        60 mm
MAXIMIM LENGTH 500 mm (With Single Station Seeling 1300mm)>
MINIMUM LENGTH   60 mm
MAXIMUM SPEED     220 pouches/min. *
MAX. WEB WIDTH 500 mm
MAIN MOTOR 2HP AC MOTOR
UNWIND MOTOR 0.5HP.AC MOTOR
 HEATER 1000 x 2 watts. 600 x 6 watts
TOTAL POWER 8.5kw
POWER SUPPLY 440 Volts AC, 3Phase with Neutral & Erath
MACHINE DIMENSION 5600(L)x800(W)* 1000(H)
AIR COMPROSSOR  REQ.   2 H.P.
* Depending on size and thickness of laminate. 
* Depending on size and thickness of laminate
** Accessories shown in the image is not standard items